7 | Unpacking
WARNING
Damage to the refrigerant circuit.
Flammable refrigerant can escape and cause
an explosive gas/air mixture. Fire hazard.
▪
Do not expose the appliance to tem-
peratures higher than 70°C (158°F)
during transport and storage.
▪
Ensure good ventilation.
▪
Observe safety notices and warnings
for appliances with flammable refrig-
erants (see → Flammable refriger-
ants).
▪
In the event of damage to the appli-
ance, promptly contact the mainte-
nance service (see → Maintenance
services).
Transport of the appliances with in-
dustrial trucks.
Risk of injury to persons in the event of a colli-
sion.
▪
Observe transport routes for indus-
trial trucks.
▪
Secure transported goods.
▪
Only trained personnel may operate
industrial trucks.
▪
Observe the stacking height specifi-
cations on the packaging.
NOTICE
Material damage caused by transport and
storage.
▪
Do not expose the appliance to temperatures
higher than 70°C (158°F) during transport
and storage.
▪
Transport and store appliances (single type
only) in a stable usage position (horizontal
alignment).
▪
If the unit was tilted during transport, wait at
least two hours before starting it up.
▪
On delivery, ensure full accessibility to the in-
stallation point (observe clearance heights,
clearance widths, installation space height,
sufficient turning radii).
▪
Do not store the appliance outdoors.
7 Unpacking
Responsibility
–
Operating companies
Check the appliance for damage before and during un-
packing.
In the event of damage, promptly contact the mainte-
nance service (see → Maintenance services).
WARNING
Dispose of packaging material and film.
Suffocation hazard.
▪
Keep packaging material and film
away from children.
▪
Do not allow children to play with
packaging material or film.
36 / 505
Damage to the refrigerant circuit.
Flammable refrigerant can escape and cause
an explosive gas/air mixture. Fire hazard.
▪
Ensure good ventilation.
▪
Observe safety notices and warnings
for appliances with flammable refrig-
erants (see → Flammable refriger-
ants).
▪
In the event of damage to the appli-
ance, promptly contact the mainte-
nance service (see → Maintenance
services).
CAUTION
Heavy appliance parts.
Hands may become trapped.
▪
Take care of fingers and hands when
unpacking.
▪
Use protective gloves.
NOTICE
Material and property damage due to missing
parts in the appliance.
▪
Check the packaging for loose parts.
▪
Do not dispose of loose parts; clarify their use
with the maintenance service (see → Mainte-
nance services).
8 Setup and installation
Responsibility
–
Operating companies
For technical data, see → Technical data Technical
modifications to the appliance only in agreement and
after approval of the manufacturer.
Do not cover the temperature display, safety notes, or
the rating plate (see → Rating plate and serial num-
ber).
WARNING
Appliance tipping hazard.
Persons may become trapped.
▪
Remove the transport frames only
when in the stable and final installa-
tion position.
▪
If you have any questions, contact the
maintenance service (see → Mainte-
nance services).
▪
Do not climb onto or into the appli-
ance.
Damage to the refrigerant circuit.
Flammable refrigerant can escape and cause
an explosive gas/air mixture. Fire hazard.
▪
Do not obstruct the ventilation open-
ings in the appliance housing. Use
only original accessory parts.
▪
Only install the appliance in well-ven-
tilated rooms.
▪
Do not install the appliance in cellars
or lowered rooms.
AHT Cooling Systems GmbH | en
405859_1_0819