Mounting The Glass Canopy - arietta Dekor Glass 30 Guía De Instalación, Uso Y Mantenimiento

•
Secure the metal electrical conduit to the junction box by the UL approved nut.
•
Electrical connections:
To connect the "Neutral", joint by a wire nut the white wire (from the conduit) to the white wire from the
o
junction box.
To connect the "Line", joint by a wire nut the black wire (from the conduit) to the black wire from the
o
junction box.
To connect the "Ground", joint by a wire nut the Green/Yellow wire (from the conduit) to the Green/Yellow
o
wire from the junction box.
•
Push wires into junction box.
IMPORTANT: Be sure wires are not pinched and / or making contact between the wires.
•
Secure junction box cover with original

Mounting the glass canopy

•
With the hood mounted on the wall slide the glass canopy over the glass supports.
•
Insert the glass brackets.
•
Insert two screws into the bracket holes, drive the screws by hand.
screws.
21