Mounting The Duct Cover Bracket; Option A - Fixed Heigh Duct Cover - arietta CHN001MX 30 Guía De Instalación, Uso Y Mantenimiento

mounting the duct cover bracket

Option A - Fixed height duct cover
•
From the horizontal line traced in the previous section, trace a horizontal parallel line as shown below.
•
Center the bracket in the top horizontal line and align it with the centerline, as described in the following
drawing.
28 - 8/16"
•
Mark screw holes locations in the wall.
ImPORTANT. Check to be sure that holes locations are leveled, and correctly centered by the vertical
centerline. (This installation instruction applies for concrete wall)
Drill 5/16" pilot holes in the marked locations.
Install wall fastener anchors.
Drive wood screws, by hand, into the fasteners to allow anchors to expand. Remove screws.
Secure the bracket to the wall with wood screws and/or fasteners.
1