Pairing The Rotating Laser And The Pra 30G Laser Receiver; Pairing The Pra 90 Tripod And The Pra 30G Laser Receiver; Using The Laser Receiver To Detect The Laser Beam; Explanation Of The Menu Options - Hilti PR 30-HVSG Manual De Instrucciones Original

6.2

Pairing the rotating laser and the PRA 30G laser receiver

1. Position both tools at a distance of about 0.5 m (2 ft) from each other. Press the
devices for at least 3 seconds.
▶ Successful pairing is confirmed by all LEDs blinking on the rotating laser a signal tone emitted by the
PRA 30G laser receiver. The
▶ The devices are paired.
▶ The rotating laser and the laser receiver switch themselves off.
2. Switch the devices on again.
6.3

Pairing the PRA 90 tripod and the PRA 30G laser receiver

1. Position both tools at a distance of about 0.5 m (2 ft) from each other. Press the
devices for at least 3 seconds.
▶ Successful pairing is confirmed by all LEDs blinking on the PRA 90 automatic tripod and by a signal
tone emitted by the PRA 30G laser receiver. The
the laser receiver.
▶ The devices are paired.
▶ The automatic tripod and the laser receiver switch themselves off.
2. Switch the devices on again.
▶ The rotating laser and the automatic tripod are shown in the display on the laser receiver.
6.4

Using the laser receiver to detect the laser beam

1. Press the
button on the laser receiver.
2. Hold the laser receiver with the receiving window directly in the plane of the laser beam.
3. Hold the laser receiver still while alignment is taking place and take care to ensure that the line of sight
between the laser receiver and the rotating laser is not obstructed.
▶ Detection of the laser beam is indicated by visual and audible signals.
▶ The laser receiver indicates the distance to the rotating laser.
▶ The laser receiver can be used at distances (radiuses) of up to 300 m (1000 ft).
6.5

Explanation of the menu options

• To display the menu, press the
•
Use the and buttons to navigate in the menu.
•
The symbol selected is shown on a dark background. Example:
•
An active setting is shown in a black frame. Example:
•
Press the button to confirm your selection.
Main menu
Marking function
Speed of rotation
Rotating laser settings
Laser receiver settings
Information
Back. Takes you back to a higher level in the menu or leaves the menu without making any
changes.
Marking function menu
Line width settings menu (display shows the currently set width)
Move line to the left
14 English
and symbols are displayed briefly on the laser receiver.
button.
and symbols are displayed briefly on
2179604
*2179604*
button on both
button on both