Operating The Laser Receiver; Pairing The Rotating Laser And The Pra 30G Laser Receiver; Pairing The Pra 90 Tripod And The Pra 30G Laser Receiver; Using The Laser Receiver To Detect The Laser Beam - Hilti PR 30-HVSG A12 Manual De Instrucciones

6

Operating the laser receiver

6.1 Inserting the batteries in the laser receiver
▶ Insert the batteries in the laser receiver.
Use only batteries that have been manufactured in accordance with international standards.
6.2

Pairing the rotating laser and the PRA 30G laser receiver

1. Position both tools at a distance of about 0.5 m from each other. Press the
for at least 3 seconds.
▶ Successful pairing is confirmed by all LEDs blinking on the rotating laser and a signal tone is emitted
by the PRA 30G laser receiver. The
receiver.
▶ The devices are paired.
▶ The rotating laser and the laser receiver switch themselves off.
2. Switch the devices on again.
6.3

Pairing the PRA 90 tripod and the PRA 30G laser receiver

1. Position both tools at a distance of about 0.5 m from each other. Press the
for at least 3 seconds.
▶ Successful pairing is confirmed by all LEDs blinking on the PRA 90 automatic tripod and by a signal
tone emitted by the PRA 30G laser receiver. The
the laser receiver.
▶ The devices are paired.
▶ The automatic tripod and the laser receiver switch themselves off.
2. Switch the devices on again.
▶ The rotating laser and the automatic tripod are shown in the display on the laser receiver.
6.4

Using the laser receiver to detect the laser beam

1. Press the
button on the laser receiver.
2. Hold the laser receiver with the receiving window directly in the plane of the laser beam.
3. Hold the laser receiver still while alignment is taking place and take care to ensure that the line of sight
between the laser receiver and the rotating laser is not obstructed.
▶ Detection of the laser beam is indicated by visual and audible signals.
▶ The laser receiver indicates the distance to the roting laser.
▶ The laser receiver can be used at distances (radiuses) of up to 300 m.
6.5

Explanation of the menu options

•
To display the menu, press the
•
Use the and buttons to navigate in the menu.
•
The symbol selected is shown on a dark background. Example:
•
An active setting is shown in a black frame. Example:
•
Press the button to confirm your selection.
Main menu
Marking function
Speed of rotation
Rotating laser settings
Laser receiver settings
34 English
14
and
button.
button on both devices
symbols are displayed briefly on the laser
button on both devices
and symbols are displayed briefly on
2179602
*2179602*