Device Status Icons - Siemens SITRANS LR250 Instrucciones De Servicio Resumidas

Parameter view
①
Parameter name
②
Parameter number
③
Parameter value/selection
6.2.2

Device status icons

For a complete list of the device status icons that appear on the LCD display, as well as what they mean, please refer to the
Diagnosing and Troubleshooting section of the full operating instructions.
6.2.3 Handheld programmer (Part No. 7ML1930-1BK)
The programmer is ordered separately.
The handheld programmer used with this device contains lithium batteries that are non-replaceable.
Lithium batteries are primary power sources with high energy content designed to represent the highest possible degree of
safety.
WARNING
Potential hazard
Lithium batteries may present a potential hazard if they are abused electrically or mechanically.
Observe the following precautions when handling and using lithium batteries:
•
– Do not short-circuit, recharge or connect with false polarity.
– Do not expose to temperature beyond the specified temperature range or incinerate the battery.
– Do not crush, puncture or open cells or disassemble battery packs.
– Do not weld or solder to the battery's body.
– Do not expose contents to water.
24
Edit view
SITRANS LR250 (mA/HART)
A5E33469191-AA, 08/2014