For Your Safety; Intended Use; Improper Use - Aventics RMC Serie Instrucciones De Servicio

AVENTICS | RCM | R402002349-BDL-001-AC
2

For your safety

The RMC-Zylinder has been manufactured in accordance with
current engineering standards and safety regulations. Even so,
there is a risk of injury or damage if the following general safety
instructions and the specific warnings given in this instruction
manual are not observed.
Read these instructions completely before working with the
RMC cylinder.
Keep these instructions in a location where they are accessible
to all users at all times.
Always include the operating instructions when you pass the
RMC cylinder on to third parties.
2.1

Intended use

The RMC-Zylinder may only be used within the limits listed in
the technical data.
The RMC-Zylinder is primarily intended to be used in industrial
applications.
Intended use includes having read and understood these
instructions, especially the chapter "For your safety".
2.2

Improper use

It is considered improper use when the RMC-Zylinder
is used for any application not stated in these instructions, or
is used under operating conditions that deviate from those
described in these instructions.
39
For your safety