Configuration - Festo SB/SF 50 Manual De Instrucciones

VISB/SF 50
2

Configuration

The SB/SF 50 control block is available in three different forms:
–
SB 50 for "stand alone" operating mode
–
SF 50/DP slave as intelligent PROFIBUS-DP slave
–
SF 50/DP master as PROFIBUS-DP-Master
The node must be configured by means of the programming
software STEP 5 and the planning software COM PROFIBUS
(SF 50/DP-Master).
PLEASE NOTE
It is not necessary to open the node.
12
9706