JVC FS-X1 Manual De Instrucciones página 28

Using the Timers
5
Setting the volume level.
Press the 3 or 2 button to select the volume level
(VOLUME 1-50), then press the SET button.
6
Select the FADE function.
Press the 3 or 2 button to select either "FADE" (fades
in at power on) or "NoFADE" (does not fade in).
7
Press the SET button.
The timer setting is completed, and the "DAILY" indi-
cator stops blinking and remains lit. Each setting you
have made appears on the display in the order of ON
time, OFF time, music source, volume and fading.
Then, the display returns to the display before you set
the timer.
8
Press the STANDBY/ON
turn off the System.
The Clock indicator (
on the display, showing that the Daily Timer is set to on.
To change the timer setting, repeat the setting proce-
dure from the beginning.
When the timer ON-time comes:
The following operation will be automatically repeated every-
day.
• When the timer ON-time comes, the System automati-
cally turns on. The "DAILY" indicator blinks, and then
"DAILY TIMER" and "TIMER STANDBY" alternate
for a while. After that, the music source you have set is
played. The "DAILY" indicator blinks during timer
operation. In the case of MELODY, it's title scrolls on
the display.
• When the timer OFF-time comes, "DAILY TIMER" and
"OFF" alternate for a while. Then, the System automati-
cally turns off and the "DAILY" indicator remains lit.
Selectable Melodies
When you select the melody as the source in step 4, you can
use one of the following melodies.
MELODY 1:Twinkle Twinkle Little Star (by W.A.Mozart)
MELODY 2:Grandfather's Clock (by H.C.Work)
MELODY 3:Csikos Post (by H.Necke)
MELODY 4:Farewell Song (by La chambre de Chopin)
MELODY 5:Canon (by J.Pachelbel)
MELODY 6:Menuett (by J.S.Bach)
MELODY 7:Humoresk (by A.Dvorak)
MELODY 8:Serenade (by J.Haydn)
MELODY 9:Jesus,Joy Of Man's Desiring (by J.S.Bach)
MELODY10:Ravel's Bolero (by Ravel)
• When you select the melody as the source, only the title
of the selected melody will appear on the display.
25
button to
) and "DAILY" indicator are lit
• When a melody is set for the Daily Timer while playing
back the CD, the CD will stop playing.
• In step 4, the selected melody will be played back for your
reference. However, if the melody is selected with the Sys-
tem turned off, no melody will be heard.
• During setting the melody, the source cannot be selected
with the Source selector on the Unit or the source select
button on the Remote Control.
• If the system is already on when the timer ON-time comes,
the Daily Timer does not work.
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory.
So, the Daily Timer will be activated at the same time every
day until it is canceled.
To cancel the Daily Timer temporarily:
On the Remote Control
1
Press the CLOCK/TIMER button repeat-
edly until the "DAILY ON?/DAILY OFF?"
appears on the display.
The "DAILY" indicator blinks on the display.
2
Press the CANCEL button.
"DAILY OFF" appears and the "DAILY" indicator
goes out.
To activate the canceled Daily Timer:
On the Remote Control
1
Press the CLOCK/TIMER button repeat-
edly until the "DAILY ON?/DAILY OFF?"
appears on the display.
The "DAILY" indicator blinks on the display.
2
Press the SET button.
The "DAILY" indicator remains lit. Each setting al-
ready made appears on the display in the order of ON
time, OFF time, music source, volume, and fading.
Then the display returns to the original display.
• "DAILY TIMER/NO SET" appears on the display
before you enter the timer setting.
CAUTION:
• If the System is unplugged, or a power fail-
ure occurs, the timer setting will be lost.
You will need to reset the clock first, then
the timer.