Ingersoll Rand N2G17FP Manual De Operación Y Mantenimiento página 2

• High Pressure Gas in Tank and System.
• Operator should relieve tank pressure and shut off air supply line before performing service.
• Rusted tanks can explode.
• Drain Condensate from tank daily. Use manual drain valve on bottom of tank.
• Do not bypass, modify or remove safety relief valve. System overpressure may result.
• Do not direct Pressurized Nitrogen stream at body.
• Never modify or repair tank. Obtain replacement from service center.
• Suffocation hazard. Do not inhale nitrogen.
• Install in a Safe location, clear of all external hazards.
• Use only in a well ventilated area to reduce risk of oxygen-enriched fire.
• Do not operate without proper mounting. Follow Installation instructions.
• Do not exceed maximum pressure (PMAX).
• Always install, operate, inspect and maintain this product in accordance with all applicable standards and regula-
tions (local, state, country, federal, etc.).
• Be sure all hoses, accessories and fittings are the correct size, are tightly secured and rated above the maximum
pressure (PMAX). Also, any external storage devices used must conform with applicable pressure vessel regula-
tions and standards (local, state, country, federal, etc.)
• Ensure an accessible emergency shut off valve has been installed in the nitrogen line and air supply line, and make
others aware of its location.
• Do not use damaged, frayed or deteriorated hoses & fittings.
• Keep clear of whipping hoses. Shut off the nitrogen or compressed air pressure to the hose before approaching the
whipping hose.
• Always turn off the air supply, bleed the nitrogen and air pressure before installing, removing or adjusting any
accessory on this product, or before performing any maintenance on this product or any accessory. Before depres-
surizing system ensure adequate ventilation
• Keep work area clean, uncluttered, ventilated and illuminated.
• Do not remove any labels. Replace any damaged label.
• Always use Personal Protective Equipment when using or performing maintenance on this product. This may
include dust mask or other breathing apparatus, safety glasses, ear plugs, gloves, apron, safety shoes, hard hat and
other equipment.
• Keep others a safe distance from your work area, or ensure they use appropriate Personal Protective Equipment.
• This product is not designed for working in explosive environments, including those caused by fumes & dust, or
near flammable materials.
• This product is not insulated against electric shock.
• Do not use this product when tired, or under the influence of medication, drugs, or alcohol.
• Never use a damaged or malfunctioning product or accessory.
• Do not modify this product, safety devices, or accessories.
• Do not use this product for purposes other than those recommended.
• Use accessories recommended by Ingersoll-Rand.
• When the life of the product has expired, it is recommended that this product be disassembled, degreased and the
parts be separated by material so that they can be recycled.
WARNING
2
Form 04581138-Edition 1