The Nitrogen tire filling systems are products of Ingersoll-Rand. This manual forms an integral part of the product. The
manual describes the daily operation, the maintenance and the troubleshooting of this system.
Content
Read the manual carefully before you start using the Nitrogen tire filling system. Familiarize yourself with the content.
Condition of change
Only execute changes to the Nitrogen tire filling system after explicit prior written permission by Ingersoll Rand. Non-
conformance to this condition, as well as any consequential damage, loss and costs are the responsibility of the owner and the
user.
Information
All information in this manual, including additional drawings and technical descriptions, remains the property of
Ingersoll-Rand and may not be used (otherwise than for the use of this product), copied, multiplied or published to or for a
third party without explicit prior written permission by Ingersoll-Rand.
In this manual the following symbols are used:
WARNING
CAUTION
The identification plate is located on the left hand side panel of the Nitrogen tire filling system. The identification plate shows
the characteristics of the system.
For service and technical assistance, please contact:
Ingersoll Rand Co.
510 Hester Drive
White House, TN
800-866-5457
www.irtools.com
1. INTRODUCTION
1.1 General
1.2 Graphic Form and Meaning of Symbols
A warning shows a hazard that can cause death or serious injury. Follow the instruc-
tions.
A caution shows a danger that can cause damage to the equipment. Follow the instruc-
tions.
Warning: Risk for death due to suffocation.
Risk of fire: Oxygen-enriched air leads to an increased risk of fire in the event of contact
with inflammable products.
High pressure risk: Follow the instructions with respect to compressed gasses.
Instructions with respect to the environment.
1.3 Identification and Service
4
Form 04581138-Edition 1