Assembly Overview Drawing - Siemens SITRANS LVS100 Instrucciones De Operación

Assembly Overview Drawing

lid
electronics module
terminal connection
board
sensor cable
process
enclosure
connection
assembly
thread G1" or 1" NPT
(use appropriate
thread sealant)
1" schedule 40 pipe
(internal min.
dia. 25.4 mm (customer
supplied and mounted)
thread G1" or 1" NPT
(use appropriate
thread sealant)
fork assembly
fork
Page EN-28 SITRANS LVS100/200 – INSTRUCTION MANUAL
tine orientation marking
process thread 1 ½" NPT
(taper) or
R 1 ½" (BSPT)
min.
18 mm
(0.75")
X = L - 255 mm
(10")
min.
Note: Threaded
18 mm
engagement to be a
(0.75")
min. of 7 mm (0.27")
SW 36
L = 300 to 3800 mm
170 mm
(6.7")
process
1" pipe
cable
thread
entries thread
1 ½" NPT ½" NPT 1" NPT
1 ½" BSPT M20x1.5 G 1"
approx.
138 mm
(5.4")
(11.8 to 149.6")
7ML19985FT63