Installation - AERMEC IDROBLOC C Serie Manual Técnico Y De Instalacion

INSTALLATION

WARNING: before performing any
maintenance intervention, make sure
that the power supply has been cut off.
WARNING: before performing any
maintenance intervention, make sure
that the power supply has been cut off.
WARNING: the electric connections,
installation of the fan coils and their
accessories must be performed only by
persons possessing the technical and
professional qualifications enabling
them to perform installation, convert,
expand and maintain the plants and
capable of performing functionality and
safety checks on the plants.
In particular, for the electric connec-
tions, the following checks are needed:
- Electrical system isolation resistance
measurement.
- Protective conductors continuity test.
Instructions essential for the proper
installation of the equipment are shown
here.
The final touches to all the operations
are however left to the experience of the
installation engineer in accordance with
the specific needs.
MINIMUM TECHNICAL SPACE
IDROBLOC 3C
IDROBLOC 8C
* = In the channelled units the height depends on the channel dimensions.
Remove the fan protection grille when the delivery channelling is created.
16
Do not install units in premises where
there are inflammable gases or acid or
alkaline substances that could irrepara-
bly damage the aluminium-copper heat
exchanger or internal plastic parts.
For installation, remember the following
instructions:
IDROBLOC C must be installed, in the
free-standing version, perfectly upright.
See the figures for the dimensions and
weights.
Observe the minimum technical clea-
rances to guarantee that the air can flow
through the coils (there must not be
any obstacles to the circulation of the
air sucked in by the coil and expelled
through the fan grille) and that routine
and extraordinary maintenance can be
carried out .
The picture included in the chapter
"Diagram of operation" summarises the
overall layout and the connections to
be made in the IDROBLOC C system
installation.
IDROBLOC 5C