Reading Out The Number Of Cleaning Cycles; Cleaning Cycles In 24 Hours; Total Cleaning Cycles; Loading Default Settings - Oase ProfiClear Premium Instrucciones De Uso

- GB -
7.6

Reading out the number of cleaning cycles

7.6.1

Cleaning cycles in 24 hours

How to proceed
Menu Clean
Press and
7.6.2

Total cleaning cycles

How to proceed
On|Off
Clean
Press and
7.7

Loading default settings

How to proceed
On|Off Menu
Press and
the display.
58
for 5 s.
for 5 s.
for 10 s until E appears in
r
r E
Information
The sum of the automatic and time-dependent cleaning cycles is saved. The
4-digit value is displayed by two groups of two digits that appear in
succession in the display.
Example:
7 : Corresponds to 117 cleaning cycles
0 0 1 1 - - 1 1 7
The number is repeated five times after an extended pause to make it
easier to read:
0 1 - 1 7 - - - 0 1 - 1 7 - - - 0 1 - 1 7 - - - 0 1 - 1 7 - - - 0 1 - 1 7
0 1 - 1 7 - - - 0 1 - 1 7 - - - 0 1 - 1 7 - - - 0 1 - 1 7 - - - 0 1 - 1 7
Note:
If the mains voltage is switched off, the counter is reset to 0.
Information
The sum of the automatic, manual and time-dependent cleaning cycles is
saved. The 8-digit value is divided into four groups of two digits that appear
in the display in succession.
Example:
4 : Corresponds to 1244 cleaning cycles
0 0 - 0 0 - 1 2 - 4
0 0 - 0 0 - 1 2 - 4 4
The number is repeated four times after an extended pause to make it
easier to read:
0 0 0 0 - - 0 0 0 0 - - 1 1 2 2 - - 4 4 4 4 - - - - - - 0 0 0 0 - - 0 0 0 0 - - 1 1 2 2 - - 4 4 4 4 - - - - - - 0 0 0 0 - - 0 0 0 0 - - 1 1 2 2
Note:
If the mains voltage is switched off, the number of cycles is rounded off to
the nearest hundred and saved.
Information
All individually set values will be overwritten!
The following values are set:
Cleaning time L : 10 s
C C L
−
Extended cleaning time C : 20 s
E E C
−
Interval of the time-dependent cleaning
−
- - 4 4 4 4 - - - - - - 0 0 0 0 - - 0 0 0 0 - - 1 1 2 2 - - 4 4 4 4
n : 20 min
I
I n