Installation And Connection; Installation Planning; Protective Measures - Oase ProfiClear Premium Instrucciones De Uso

- GB -
5

Installation and connection

A, B, C
Important: If the planned installation deviates significantly from the recommendations contained in this
manual:
Have your specialist retailer check whether all technical specifications were adhered to. This is
►
crucial for a problem-free operation.
5.1

Installation planning

F
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries due to operation of electrical units or installations in
or near swimming ponds.

Protective measures:

Only use electrical units or installations with a rated voltage of U
►
Observe a distance of 2 m from swimming ponds for operating electrical units or installations with a
►
rated voltage of U
Adhere to national and regional regulations.
►
Note:
Use suitable transport and lifting aids to transport and install the unit.
The unit weighs more than 25 kg (→ Technical Data).
Plan the installation of the filter system. With careful planning, taking the ambient conditions into
account, you will obtain optimum operating results.
The following conditions must be met:
As the filter modules are very heavy when filled, they must be placed on a suitable base (at least on
►
slabs, but preferably on a poured concrete base) to prevent them from subsiding.
Plan sufficient space for carrying out cleaning and maintenance work.
►
Drain the dirty water into the drain or far enough away from the pond so that it cannot flow back into
►
the pond.
If the coarse soiling and dirty water both run into the same pipe, it is important to use at least DN
−
110 pipes.
Note:
A water course or waterfall guarantees optimum water return to the pond.
In this way, the filtered pond water is enriched with oxygen before it is returned to the pond.
46
> 12 V or U >30 V.
AC DC
≤ 12 V or U ≤30 V.
AC DC