Ikegami ICD-809 Manual De Instrucciones página 29

(15) Day/night switching:
(16) Auto iris function:
(17) Focus EZ function:
(18) Camera ID:
(19) Mirror function:
(20) Local setup:
(21) Remote setup:
(22) Lens mount:
(23) Lens Flange Back Adjustment: Provided. Screw Lock type with rotary Disk
(24) Power Requirement:
(25) Power consumption/current:
(26) Operating temperature
and relative humidity:
(27) Camera mount:
Automatic/Remote/Manual selectable
(In the automatic mode, the day/night
switching level can be preset. In the remote
mode, the MAKE/BREAK setting can be
preset.)
Compatible with VIDEO iris and DC iris
(switchable, with DC iris level adjuster)
Provided
1 Line
Up to 24 characters (alphanumeric and symbols)
Image mirror-reversal function ON/OFF
Selectable and adjustable with on-screen
display using pushbuttons on the camera
rear panel;
Camera ID numbering, AGC On/Off
Auto-White Balance ATW1&2,AWC,MANU
selection and adjustment, Sync Selection in
AC Line Lock, Internal Crystal controlled
Lock, LL phase adjustment, iris level, spot
area setting, optimum monitor selection for
CRT or LCD types, Detail correction
management, Chroma level control, Day/
Night mode switching and Thresh-hold
Provided (Control by RCU-701/RCU-801 or
RS-485)
Same control parameters as with the local
setup on the rear panel
CS mount
① AC 24 V ±10%, 60 Hz,
or DC 12 V (+10.5V to +28 V)
② AC 100V, (Japanese version only)
4.3 watts nominal, 350mA, for AC 24 V;
4.2 watts nominal, 340mA, for DC 12 V
3.7 watts nominal, 70mA, for Japanese
100V version
-10°C to +50°C,
+30 to +90% RH (No Condensation)
1/4" - 20UNC (top and bottom mountable)
E-26