Handling Precautions; General - Ikegami ICD-809 Manual De Instrucciones

1. Handling precautions

• Do not install the camera in a water-splashed or highly humid environment.
• Do not use the camera where the ambient temperature drops below -10°C or
rises above +50°C. The images and component parts may be adversely affected
or the camera may not function correctly.
• Never open the camera case because there are precision electrical and electronic
components inside and an accident may result.
• Do not put anything metallic or any other foreign substances through the vent, as
a fire or electric shock may result.
• Be sure to turn off the power before installing or making connections.
• Do not install the camera in places exposed to heat, vibrations and shocks.
• Be careful not to drop or give a strong shock to the camera while transporting it.
• Do not touch the image sensor
• Do not orientate the camera directly towards the sun.
• Some types of lenses may hunt in adverse light conditions. In such cases please
re-adjust the lens in line with the instructions in the manual.
* Because of the characteristics of the digital image device, images may look
unnatural at high temperatures, this does not mean the camera is faulty.

2. General

This color camera is provided with a 1/3-inch highly sensitive 380,000 pixel interline
transfer CCD sensor with on-chip-micro lens technology. The camera features a
highly sensitive and wide spectral response with high resolution, and is equipped
with true Day/Night function, intelligent back-light compensation by which you can
achieve proper Back Light Compensation, Automatic iris control, Phase adjustable
AC line lock or Crystal controlled internal sync lock system, Various modes of
convenient Automatic white balancing, Optimum monitor output selection to have
best suited display quality for either CRT or LCD monitors, camera setup and
control is also possible locally on the camera rear panel, or remotely via I-LAN(*)
remote software control over RS-485 link and this setup data is stored in the built-
in non-volatile memory. The camera is best suited for general surveillance purposes,
from single camera operation to large scale integrated systems for visual information
management.
* I-LAN : Ikegami security surveillance system control software for RS-485.
Refer to the Section 5-4-10 for Remote control and RS-485
E-1