Entering The Setup Mode And Its Basics - Ikegami ICD-809 Manual De Instrucciones

5-3. Entering the setup mode and its basics

5-3-1. SETUP MENU (Main menu)
ＳＥＴＵＰ ＭＥＮＵ
ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＤＡＹ／ＮＩＧＨＴ ＡＵＴＯ
ＳＨＵＴＴＥＲ ＯＦＦ
ＬＩＧＨＴ ＣＯＮＴ． ＬＥＮＳ
ＧＡＩＮ ＡＧＣ
ＷＨＩＴＥ ＢＡＬ． ＡＴＷ１
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＥＸＩＴ ＣＡＮＣＥＬ ＲＥＳＥＴ
(1) CAMERA ID
(2) DAY/NIGHT
(3) SHUTTER
(4) LIGHT CONTROL
(5) GAIN
(6) WHITE BALANCE
(7) SYNC
(8) MENU LOCK
(9) SETUP
① EXIT:
② CANCEL:
③ RESET:
* New settings can be saved, if EXIT is selected to quit the menu.
Hold down the E button longer than 2
seconds, and the menu at left appears
onscreen. A highlighted item is now
selected.
Up to 24 alpha-numeric characters can be displayed on
screen.
The day (color) or night (Mono) mode is selected.
To select high speed shutter
The backlight compensation and sensing spot area
modes can be selected. The DC type iris lens is adjusted.
The gain control mode is selected.
The white balance mode is selected.
The manual white balance settings are made.
The Sync systems, AC line Lock, internal Lock or Gen-
lock mode are selected
The saved settings can be locked.
The EXIT, CANCEL or RESET action is selected and
executed.
Used to save the settings and to quit the menu.
Used to return the settings to the previously saved ones.
Used to return the settings to the factory ones.
E-10