Description Of Functions - Saeco IDEA Manuel De Uso Y Mantenimiento

English
5 SEC.
LANGUAGE
CUP WARMING PLATE %
GROUND DOSE
TEMPERATURES
PREBREWING
PROGR. HOT WATER
functions explanation
follows in the next page

12.7.1 Description of functions

LANGUAGE
- Language can be selected through the "LANGUAGE"
menu .
172
PROGRAMMING
ITALIANO
DEUTSCH
ENGLISH
FRANCAIS
ESPANOL
PORTUGUES
NEDERLANDS
0....100%
except 2 grinder unit set-up
1 STRONG COFFEE
2 STRONG COFFEES
1 WEAK COFFEE LOW
2 WEAK COFFEES STANDARD
JUG HIGH
COFFEE WITH A DASH OF MILK
CAPPUCCINO
COFFEE LOW
STANDARD
FIRST COFFEE HIGH
OFF
SHORT
LONG
ON
OFF
CUP WARMING PLATE % (except 2 grinder unit set-up)
- This function allows you to activate the cup-warming
surface adjusting it from 0 to 100% at intervals of 10.
GROUND DOSE
The quantity of ground coffee, programmed during the
installation, can be adjusted at every brewing.
- By selecting "LOW" or "HIGH", the dose is decreased
or increased by 1 g.
- By selecting "STANDARD", the machine will brew the
dose initially programmed by the Maintenance Tech-
nician.
TEMPERATURES
The brewing temperature of water, programmed during the
installation, can be adjusted at every brewing.
- By selecting "LOW" the temperature decreases by
3°C.
- By selecting "HIGH" the temperature increases by 3
°C.
- By selecting "STANDARD" the temperature will the one
programmed by the Maintenance Technician.
NOTE - The temperature "first coffee" is selected at the first
brewing, when the machine is switched on.
PREBREWING
This function allows a short dwell time during the first
brewing phase. This can improve the quality of the coffee
which, during the dwell, has the time to "infuse" into the
first part of water received. Selecting:
- "OFF", no pre-brewing is performed.
- "SHORT", the "pre-brewing" programmed by the Main-
tenance Technician is performed.
- "LONG", the "pre-brewing" is extended by 1 sec.
PROGR. HOT WATER
This function enables to set the quantity of brewed hot
water. By selecting:
- "ON", the button , (Pr. 12.6) can be programmed.
- "OFF", the button cannot be programmed, therefore
the quantity of hot water has to be manually adjusted.