Key To Machine Components; Description Of Control Panel; Use Of The Machine; Filling The Water Tank - Saeco Office One Instrucciones Para El Uso

Servicing / Maintenance
In the event of a breakdown, fault or suspected damage after a fall, immediately
unplug the machine and notify the service provider or specialised technician.
Never attempt to operate a faulty machine.
Only the service provider and/or a specialised technician are authorised to per-
form servicing and repairs.
Fire safety
In case of fi re use carbon dioxide extinguishers (CO
powder extinguishers.
3 KEY TO MACHINE COMPONENTS (FIG. 01, PAG.2)
1 Control panel
2 Capsule loading tray
3 Steam/hot water spout
4 Coffee/product brew group
5 Cup holder grill (small cups)
6 Cup holder grill (large cups)
7 Used capsule drawer and drip tray
8 Access hatch to dispensing outlet
9 Power cord
10 Cup stacking surface or cup warming plate (if provided)
11 Main switch
12 Water tank
13 Water tank cover
3.1 Description of control panel (Fig.02, pag. 2)
14 Espresso button When this button is pressed the machine will brew
an espresso coffee (quantity programmed by the
service provider).
15 Coffee button When this button is pressed the machine will brew
a coffee (quantity programmed by the service pro-
vider).
16 Long coffee button When this button is pressed the machine will brew
a long coffee (quantity programmed by the service
provider).
17 LCD Display It displays the machine status and any alarms, and
guides the user in the operation of the machine.
18 Hot water button When this button is pressed for 1 second, the ma-
chine will instantly dispense hot water.
19 Steam button When this button is pressed for 1 second, the ma-
chine will instantly dispense steam.
20 Steam button AND By pressing these 2 buttons contemporarily, it is
hot water button possible to scroll the languages supported by the
machine. To set a language, release the 2 buttons
when the desired language is displayed.
4

USE OF THE MACHINE

4.1

Filling the water tank

Before starting up the machine, it is necessary to fi ll the water tank with fresh
drinking water.
Warning! Carefully wash the water tank before fi rst use.
The tank should be fi lled only with fresh drinking water. Hot or
carbonated water or other liquids will damage the machine.
Using the key supplied with the machine, open the cover of the water tank and
lift it off.
Use of the machine - User Manual
). Do not use water or
2
Lift out the tank using the handle provided.
Fill the tank with fresh drinking water.
After fi lling the water tank, set it back in place, taking care to position it cor-
rectly; in this manner the valve situated at the bottom will open and allow the
machine to operate properly.
Replace the cover on the water tank.
Lock the cover in place using the key provided.
Now the machine is ready to be switched on and to dispense beverages.
4.2
Before switching on the machine, make sure the plug is properly inserted in
the electric socket.
To switch on the machine, move the main switch on the back of the machine
to "I" (Fig. 03, pag. 3).
The display will show:
At this time the machine is warming up.
When the machine reaches the right temperature for dispensing the beverage,
the display will show:
Now the machine is ready to brew coffee, or dispense hot water and/or
steam.
When fi lling the tank, never exceed the maximum level as indicated
by the arrow.

Switching on the machine

Warning! Only the service provider is authorised to make the con-
nection to the mains power supply!
Saeco Office One ¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼ Heating
Wait please... ¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼ Saeco Office One
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Ready ¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼ Insert capsule
• 29 •