Gossen MetraWatt GEOHM C Manual De Instrucciones página 46

Default Settings – Last Used Settings
A selection can be made here as to whether the menus will be displayed
according to the default settings, or if the last opened menus should be
displayed.
Ð
Press the Setup key.
Ð
Press the Default key if necessary:
on 3
Settings such as T (20 sec.) are reset to the default settings
on
when the instrument is switched on.
off 3
The last used settings remain effective when the instrument is
switched on.
Ð
Exit the setup menu by pressing the
10
key.
Setting On-Time, Manual Shutdown
Ð
Press the Setup key.
Ð
Press the T key and then the 10sec, 20sec, 30sec or 60sec key depend-
on
ing upon the desired duration after which the test instrument should
switch off automatically. Additional setting options can be displayed
by activating the scroll bar with the
If the ">>>>>" setting is selected, no automatic shutdown occurs.
The selected setting has a substantial influence on battery service life.
Ð
Exit the setup menu by pressing the
or the key.
key.
GMC-I Messtechnik GmbH