Handling Precautions - Siemens Sitrans LC300 Manual De Instrucciones

Approvals
• General
• Hazardous
• Marine
• Overfill Protection
• Other
Installation
WARNING:
This product can only function properly and safely if it is correctly
transported, stored, installed, set up, operated, and maintained.

Handling Precautions

WARNING: To prevent damage, all LC300 units with a rod longer than 2 m (6.5 ft)
must be handled as described below.
When lifting LC300 from a horizontal position, support it at these three points:
Towards the end of the
rod
Once vertical, LC300 may
be held by the process
connection or flange:
7ML19985QH82
CSAus/c, FM, CE, C-TICK
Dust Ignition Proof With Intrinsically Safe Probe:
(Europe) ATEX 1/2 D T100 ºC
(US/Canada) FM/CSA:
Class II, Div. 1, Groups E,F,G
Class III T4
Flameproof With Intrinsically Safe Probe:
(Europe) ATEX II 1/2 G EEx d [ia] IIC T6...T1
ATEX II 1/2 D T100ºC
(Brazil) BR-Ex d [ia] IIC T6...T1
Explosion Proof With Intrinsically Safe Probe:
(US/Canada) Class I, Div. 1, Groups A,B,C,D
Class II, Div. 1, Groups E,F,G
Class III T4
Bureau Veritas Type Approval
ABS Type Approval
AIB-Vincotte
Pattern Approval (China)
Midway along
the rod
SITRANS LC300 – QUICK START MANUAL
At the process
connection or flange
Note: Unit shown is LC300 Threaded
Rod Version. Handling precautions
apply to all LC300 units with rods
longer than 2 m (6.5 ft).
Page EN-3