Sewing Preparation; Touch Panel Lcd; Home Button - Singer SE300 Manual De Instrucciones

S P
EWING REPARATION

TOUCH PANEL LCD

When you turn on the power, the touch panel LCD will display
NOTE:
If the message show below appears, this means the needle
is not in correct position. Turn the hand wheel toward you to
button.
CAUTION
H S (A)
OME CREEN
When you turn on the power, machine will display the Home
By pressing this button, you can select and sew stitch
pattern normally.
b. Sequence Mode Button
By pressing this button, you can combine stitch patterns
and letters easily by selecting each pattern or letter.
NOTE:
appear. Turn the machine off, then remove the embroidery unit.
H B (B)
OME UTTON
pressing the Home Button.
A
B
SEWING MODE
the pattern chart located inside of the top cover.
✓"
NOTE:
It is not possible to sew when the embroidery unit is attached.
S I
TITCH NFORMATION
The shape of stitch pattern will change according to
the setting of stitch length, width, mirror/reverse and
elongation.
b. Pattern Number
Indicated presser foot is one of suggested foot for normal
instruction manual.
SELECTING A STITCH
select that stitch number immediately.
from 10 and up. If the stitch number does not exist, you will
hear a beep and the last entered stitch number will remain
selected.
a
b
13
b c
a
d e