Bound Buttonhole - Singer SE300 Manual De Instrucciones

S
EWING
1 2
1 2
1 2
1
1 2
1 2
1 2
8. Press the Thread Cutter button and raise the presser foot
to remove the fabric.
To sew over same buttonhole, raise presser foot to return
to original position.
9. Use a seam ripper to cut open the center of the buttonhole,
being careful not to cut into the ends of the buttonhole. It is
helpful to place a pin at the end of the buttonhole to serve
as a stopper while cutting.
CAUTION
3 4
3 4
3 4 5
2 3
3 4
3 4 5
3 4 5
33
NOTE:
edge of multi-layered garments, install the Underplate. Place

BOUND BUTTONHOLE

A bound buttonhole provides a professional touch to tailored
garments like suits, coats and jackets.
30. Bound Buttonhole
Baste a patch so that the center line of patch will align with
the center line mark of buttonhole.
a. Right side of fabric
b. Wrong side of patch
Machine will sew the buttonhole in the order as shown and
stop automatically after sewing.
1 2 3 4