Features And Controls; Access Panels - Briggs & Stratton FORTRESS Manual Del Usuario

Features and Controls

Access Panels

The generator is equipped with an enclosure that has
several access doors, shown above. The doors are named
for a significant component located behind them, as follows:
A - Fuel inlet port
B - Control panel doors
C - Exhaust opening
D - Coolant/oil fill door
E - Battery door
F - Muffler panel
The coolant/oil fill door, battery door, and control panel
door(s) must be installed and closed whenever the unit is
running to assure proper cooling, reduce noise, and for
safety.
The enclosure also includes muffler and radiator panels, that
should be opened only for access to clean or inspect those
components. These panels should remain closed at all other
times.
C
B
A
F
Each generator is shipped with a set of identical keys. These
keys fit the locks that secure the access doors.
To open access doors:
1. Insert the key into the door handle lock and turn it one
2. Grasp the door handle and turn it one quarter turn
3. The coolant/oil fill door is unlocked in the same
To close access doors:
1. Close the door and turn door handle one quarter
2. Insert the key into the door handle lock and turn it one
D
quarter turn counterclockwise.
counterclockwise to open. Remove the key.
manner for access to checking or adding coolant or oil.
turn clockwise.
quarter turn clockwise. Remove the key.
E
21