Menu - Briggs & Stratton FORTRESS Manual Del Usuario

Menu

The following chart shows the icons for the buttons that control the system control panel.
ESCAPE (EXIT)
RIGHT ARROW
LEFT ARROW
MANUAL MODE
AUTOMATIC MODE
The following chart describes key sequences for accessing different programming modes.
ENTER THE MENU (VIEW SETTINGS)
MENU
PRESS TO CONFIRM SELECTION WHEN PROGRAMMING.
RETURN TO LAST MENU ITEM
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
USED TO MANUALLY START THE GENERATOR. PRESS AND
HOLD BUTTON TO START THE GENERATOR.
TURNS OFF RUNNING GENERATOR, PREVENTS UNIT FROM
OFF
STARTING, AND RESETS ANY DETECTED FAULTS.
NORMAL OPERATING POSITION. PRESS AND HOLD BUTTON
TO PLACE UNIT INTO AUTOMATIC MODE. IF A UTILITY POWER
OUTAGE IS SENSED, THE
SYSTEM WILL START THE GENERATOR. WHEN UTILITY POWER
IS RESTORED, AUTO LETS THE ENGINE STABILIZE INTERNAL
TEMPERATURES, SHUTS OFF THE GENERATOR, AND WAITS FOR
THE NEXT UTILITY POWER OUTAGE.
GENERAL
SET UP
ADVANCED
SETTINGS
WIRELESS
LINK MODE
PRESS AND HOLD [ARROW LEFT AND ARROW RIGHT]
FOR THREE SECONDS TO ENTER THE PROGRAM
MODE.
PRESS AND HOLD [ARROW LEFT, ARROW RIGHT AND
ESC] FOR THREE SECONDS TO ENTER THE ADVANCED
SETTINGS MODE.
PRESS AND HOLD [MENU AND ESC] FOR THREE
SECONDS TO ENTER THE WIRELESS LINKING MODE.
25