Important - Zhermack ARIO 35 Manual Del Usuario

supplied, or in a way to jeopardise integrity or modify
features, Zhermack is relieved from any liability inherent to
safety of persons and faulty operation of the equipments.
2.2 WARRANTY: GENERAL STANDARDS
Find the Warranty Certificate and the Identification Form
attached to this Use and Maintenance Manual, which
must be filled in completely.
Generally the warranty is rendered null and void by the
following:
• improper use of the equipment;
• incorrect installation;
• negligence of envisioned maintenance;
• modifications or interventions not authorised by the
Manufacturer (especially on safety devices);
• use of non-original spare parts.
IMPORTANT: Always keep the original product
packaging throughout the guarantee period.
You will need the packaging if the product has
to be returned to the Service Centre for repairs
or replacement in the event of manufacturing
defects or malfunction (with the exception of
wilful damage, negligence, failure to perform
routine maintenance or damage during
transport). If you are not in possession of the
original packaging, contact Zhermack and ask
for instructions (possible repackaging costs
will be charged on delivery). The customer is
responsible for all costs associated with
unsuitable packaging of the product to be
returned to the manufacturer. Zhermack is not
liable for faults, malfunctions or damage to
the product deriving from or consequent to
the use of unsuitable packaging, or packaging
not of a quality equal to or better than the
packaging used for the original shipment.
As of this moment Zhermack is relieved from all
liability if any type of modification or tampering is
made on the equipment without previous
written authorisation from the Manufacturer.
Consequently, any repairs made by unauthorised
staff, use of non-original spare parts or failure to
comply with the installation standards specified
in this manual shall immediately render the
warranty null or void.
2.3 AUTHORISED STAFF
The staff in charge of the equipment is divided into the
following categories:
Operator - user
Person trained to use the equipment. Person trained
in use of the equipment. Performs all tasks involved in
operation of the ARIO 35 device, such as:
use, cleaning, inspection and simple interventions linked
to normal equipment use.
The operator-user must operate with the equipment
mounted according to that stated in this manual.
ARIO 35
Before using the equipment or carrying out any
intervention on it, the operator must read the
entire manual carefully. This manual has been
drawn up to provide the user with essential
information on rational, safe use of the
equipment. The user must comply with the
information given at all times. The user must also
use the worksheets, attached to this manual, to
keep a record of maintenance interventions,
component replacement as well as make notes
regarding anomalous functioning.
Maintenance technician authorised by Zhermack
Person who operates in all operating conditions and
at all safety levels to perform repairs/ mechanical and
electric adjustments, periodic preventive maintenance
and replacement of any components.
2.4 GENERAL SAFETY PROVISIONS
It is the operator's responsibility to follow the advice and
warnings given here scrupulously in order to preserve and
use the machine in complete safety. They must:
• not allow the machine to be used by untrained persons;
• provide an optimum work surface, preparing a clean,
appropriately lit, obstacle free work area;
• avoid distractions while using the machine;
• in the event of malfunction, follow the recommendations
given in this Manual and in the event of doubt stop the
appliance and contact an Authorised Service Centre
immediately;
• never use the machine if it is malfunctioning and always
warn the maintenance manager of all abnormalities;
• never open parts of the machine containing electrical
components;
• never replace the power cable or tamper with the plug
provided;
• if the electrical cable controlling the pedal and/or the
pedal switch requires replacement due to damage or
wear, contact an Authorised Service Centre only.
• never machine objects with characteristics other than
those for which the machine was designed;
• before cleaning or performing routine and/or
extraordinary maintenance on the machine, make sure
it is unplugged from the mains power supply;
• always make sure there is no foreign matter inside the
work area to avoid damage to the machine and/or
accidents to personnel;
• do not use petrol or flammable solvents as cleaners;
use only non-flammable, non-corrosive, non-toxic
substances.
• Zhermack is not liable for damage to the
• Use other than the designated use indicated in
The reference figures can be found on pages , 4, 5 and 6 of this manual.
machine resulting from incorrect maintenance
performed by non-specialised personnel or not
wholly complying with the contents of this
manual.
this manual absolves Zhermack from all liability
for damage to persons or things.
EN
21