CAME FLUO-SW Manual De Ensamblado E Instalación página 57

8. ELECTRONIC CONTROL ADJUSTEMENT
The electronic control has 4 buttons and 4 alphanumeric displays to set all the necessary adjustments.
After turning on the electronic control, the display shows the word "MENU". The operation of the four keys are indicated in
the table.
Keys Description
ENTER Select button, each time you press the button you enter on the
selected parameter.
Save button, pressing for 1 seconds you "SAVE" the selected value.
MENU = Main parameters menu
MEM = Memory management menu
ADV = Advanced parameters menu
SEL = Function selector menu
INFO = Information and diagnostics menu
ESC Exit button, exit from all the parameter or exit from the menu.
↑ Scroll button, each press selects a menu item or increases the value
of the selected item.
↓ Scroll button, each press selects a menu item or reduces the value of
the selected item.
8.1 BASIC SETTINGS MENU
Using the buttons ↑ and ↓ choose MENU, press ENTER to select and adjust the following main parameters:
Display Description
DOOR Setting the automation type. Choose between the following values:
DOOR TYPE
SW2 = SW2 automation PBB2 (LIGHT)
SW4 = SW4 automation PBBS2 (SPRING)
SW5 = SW5 automation PBB3 (HEAVY)
OPEN Setting the opening direction. Choose between the following values:
OPENING ← = door hinged on left
DIRECTION
→ = door hinged on right
ARM Setting the type of arm. Choose between the following values:
ARM TYPE
PULL = sliding arm
PUSH = articulated arm
VOP Opening speed setting. Choose between the minimum and maximum:
OPENING
minimum value = 15 deg/s
SPEED
maximum value = 70 deg/s
VCL Closing speed setting. Choose between the minimum and maximum:
CLOSING
minimum value = 100 mm/s
SPEED
maximum value = 700 mm/s
TAC Open door time setting. Choose between the minimum and maximum:
CLOSING TIME
NO = the door is always open
minimum value = 1 s
maximum value = 30 s
PUSH Force setting. Choose between the minimum and maximum:
MOTOR
minimum value = 1
POWER
maximum value = 10
LEAF Setting the weight of the door. Choose between the following values:
DOOR WEIGHT
MIN = light door
MED = medium door
MAX = heavy door
RAMP Set the acceleration time. Choose between the minimum and maximum values:
ACCELERATION minimum value = 100 ms (maximum acceleration)
TIME
maximum value = 2000 ms (minimum acceleration)
BTMD Setting operation of battery power device, in absence of electricity. Choose between the following
BATTERY
values:
MODE
NO = battery not connected
EMER = emergency open
CONT = continuation of normal operation of the door, with last cycle of opening
Note: the number of operations with battery, depends on the efficiency of the battery, the weight of
the doors and the present friction.
FA00008-EN v.7 – 05/2017 23
Factory settings
SW2
←
PULL
50
50
1
10
MED
400
NO
CAME S.p.A.