CAME FLUO-SW Manual De Ensamblado E Instalación página 61

Display Description
SYNC Door with 2 leaves, setting of master-slave synchronization. Choose between the following values:
DOOR NO = no synchronization (door with 1 leaf)
SYNCHRO-
MAST = automation which opens first
NIZATION
SLAV = automation which closes first
SDLY Door with 2 leaves, setting of delay of movement between Master-Slave. Choose between the
DOOR DELAY
following values:
NO = leaves without overlap
MIN = minimum delay
MED = medium delay
MAX = maximum delay
8.4 FUNCTION SELECTOR MENU
Using the buttons ↑ and ↓ select SEL, press ENTER to select and adjust the following function selector menu.
Display Description
MODE Displaying of operating mode of function selector device. Choose between the following values:
SELECTOR
NO = no mode
MODE
OPEN = open door
AUTO = automatic bi-directional operation
CLOS = closed door
1D = automatic one-way operation
PA = automatic partial operation
1DPA = automatic one-way operation and partial
SECL How to activate the function selector. Choose between the following values:
SELECTOR
NO = function selector always accessible
LOCK
LOGO = function selector accessible by selecting the logo for 3 seconds
TAG = function selector accessible with badge and numeric code
DLAY Setting delay time function closed door. Choose between the minimum and maximum values:
DELAY minimum value = 1 s
CLOSED
maximum value = 5 min
DOOR
TMEM Saving procedure of badge and numeric code for function selector. Choose between the following
TAG
values.
MEMORISE
NO = no saving
SMOD = Saving badge and numeric code for activation of the function selector:
- press the ENTER button for 1 second, the display shows REDY,
- approach the badge to the function selector (in front of the NFC symbol), the display shows the
badge code,
- wait for 20 seconds or press the ESC button.
OPEN = Saving badge and numeric code for activation of priority opening: proceed as SMOD
Note: if the badge and the numeric code is not recognized the display shows the message UNKN, or if
the badge and the numeric code is already stored will show the message NOK.
You can store a total maximum of 50 badges and numeric codes.
TDEL Cancellation procedure of badge and numeric code. Choose between the following values.
TAG DELETE
NO = no cancellation
YES = badge and numeric code cancellation
- press the ENTER button for 1 second, the display shows REDY,
- approach the badge to the function selector (in front of the NFC symbol), the display shows the
badge code,
- wait for 20 seconds or press the ESC button.
Note: if the badge and the numeric code is not recognized the display shows the message UNKN.
FA00008-EN v.7 – 05/2017 27
Factory settings
NO
MED
Factory settings
NO
NO
1
NO
NO
CAME S.p.A.