Remote Control Unit (Rc5300Zs) - Marantz ZS5300 Manual Del Usuario

Remote control unit (RC5300ZS)

1
2
3
4
q GLOBAL CONTROL buttons
With these buttons you can control volume, source
selection, etc. for all the zones at the same time. If two or
three units are connected in cascade, all the zones can
be controlled at the same time as well.
• GLOBAL DIRECT button
This enables you to select the Zone Direct input
(dedicated to that zone) to be played in all
zones 1, 2, & 3 of all connected ZS5300s.
• GLOBAL INPUT 1, 2, 3 button
This enables you to select the Input 1,2,or 3 to
be played globally with all connected ZS5300s.
• GLOBAL ON / OFF button
This enables you to turn the power on/off for the
all zones of all connected ZS5300s. Press once
to turn on, press again to turn off.
• GLOBAL MUTE button
This enables you to turn the mute on/off for all
connected ZS5300s. Press once to turn mute
on, press again to turn mute off.
• GLOBAL VOLUME button
This enables you to control the volume up/down
for all the connected ZS5300s.
• GLOBAL ON button
This enables you to turn the power on for the all
zones of all connected ZS5300s.
• GLOBAL OFF button
This enables you to turn the power off for the all
zones of all connected ZS5300s.
6
GLOBAL CONTROL
DIRECT ON/OFF MUTE
INPUT
VOLUME
1 2 3
ZONE 1 ZONE 2 ZONE 3 GLOBAL
ON ON
DIRECT POWER
OFF OFF
ZONE 1
DIRECT ON/OFF MUTE
INPUT
VOLUME
1 2 3
ZONE 2
DIRECT ON/OFF MUTE
INPUT
VOLUME
1 2 3
ZONE 3
DIRECT ON/OFF MUTE
INPUT
VOLUME
1 2 3
SET ID-1 ID-2 ID-3
REMOTE CONTROLLER RC5300ZS
w DIRECT POWER button
You can control power for each zone independently with
these buttons.
• ZONE 1 DIRECT ON button
Turn the power on for Zone 1 independently.
• ZONE 1 DIRECT OFF button
Turn the power off for Zone 1 independently.
• ZONE 2 DIRECT ON button
Turn the power on for Zone 2 independently.
• ZONE 2 DIRECT OFF button
Turn the power off for Zone 2 independently.
• ZONE 3 DIRECT ON button
Turn the power on for Zone 3 independently.
• ZONE 3 DIRECT OFF button
Turn the power off for Zone 3 independently
e Buttons for ZONE 1, 2, 3
The descriptions below are common. The button's
functions are the same for Zone 2 and 3; so only the
buttons for Zone 1 described.
• ZONE 1 DIRECT button
Select the "Zone Direct" input for Zone 1.
• ZONE 1 INPUT 1, 2, 3 buttons
Select the "Input 1" or "Input 2" or "Input 3" for
Zone 1.
• ZONE 1 ON / OFF button
Turn the power on/off for Zone 1.
Press once to turn on, press again to turn off.
• ZONE 1 MUTE button
Turn the mute on/off for Zone 1.
Press once to turn on, press again to turn off.
If volume is adjusted when muted, mute is
turned off.
• ZONE 1 VOLUME button
Control the volume up/down for Zone 1.
r ID setting button
When two or three ZS5300s are connected remote cable
together or used in same area, this allows the setting of
different ID numbers.
See "ID Code Setup" for setting ID code for the remote
control unit. ( P. 8)
Default setting the unit is ID-1.