Operating Hours Counter - Renfert SILENT V4 Traducción Del Manual De Instrucciones Original

⇒ Press menu key (30) 5 x.
MENU
30
A
♦ The switch off time symbol (35) blinks.
♦ The letters A, B, C, D blink.
⇒ Press the suction channel key (42) of the channel which is to be set.
♦ The letter of the suction channel to be set is shown in the display.
♦ In the display, the set switch off time for the suction channel is shown in seconds.
⇒ Using the /
⇒ Press the enter key (45).
⇒ Using the suction channel key (42), select the next suction channel or leave this mode by pressing the
menu key (30).

5.6.6 Operating Hours Counter

The operating hours counter records the turbine running time.
• Total operating hours: cannot be reset to zero.
• Partial operating hours: can be reset to zero, e.g. after the turbine has been changed. It also records
how often the operating hours counter has been reset.
Read total operating hours:
MENU
A
30
A
⇒ Press menu key (30) 6 x.
♦ The operating hours symbol (36) blinks.
♦ "Total" is displayed (36).
♦ The total amount of operating hours is displayed.
⇒ To leave the mode press menu key (30) 2 x.
Reset partial operating hours:
MENU
A
30
A
35
OFF
ON
C
B C D
42
keys (46, 48) alter and set the required switch off time.
OFF
ON
C
B D
B C D
OFF
ON
B C D
B C
D
total
reset
45 46
36
total
36
reset
45 46
- 17 -
resetdefault
ON
48
Fig. 19
Fig. 20
resetdefault
48
Fig. 21
EN