Single / Multi Use - Renfert SILENT V4 Traducción Del Manual De Instrucciones Original

⇒ Press menu key (30) 6 x.
♦ The operating hours symbol (36) blinks.
⇒ Press
EN ♦ "Reset" is shown (36).
♦ The number of operating hours since the last reset is shown.
⇒ Press and hold
♦ The digit "zero" blinks.
⇒ To leave this mode press key (30) or press the enter key (45).
Read the number of resets:
MENU
30
⇒ Press menu key (30) 6 x.
♦ The operating hours symbol (36) blinks.
⇒ Press
♦ "Reset" is displayed.
♦ The display shows "no" (= number) and how often the operating hours counter has been reset.
⇒ To leave this mode press key (30) or press the enter key (45).
Using the
"reset operating hours" / "see number of resets" without leaving this menu item.

5.6.7 Single / Multi Use

This menu item determines which operating mode will be activated after the unit is switched on.
MENU
30
⇒ Press menu key (30) 7 x.
♦ Either the single use symbol (51, Fig. 10), or the multi use symbol (52) will blink.
⇒ Press the operating mode key (44) many times until the required operating mode is set.
⇒ Press the enter key (45).
key (46).
/ keys (46, 48) at the same time until the operating hours are reset to zero.
A B C
key (46) 2 x.
/ keys it is possible to alternate between the functions "read total operating hours" /
A B C
36
OFF
reset
ON
D
45
52
D
44
45
- 18 -
46
Fig. 22
ONOFF
Fig. 23