Match The Collar Receiver And Remote Transmitter - SportDOG SPORT TRAINER 1275 Guia De Inicio Rapido

STEP::04

MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER

The Remote Transmitter has been pre-configured to work with the Collar Receiver. However, if you are using
multiple Collar Receivers you will need to match the Collar Receivers to the Remote Transmitter.
TO MATCH THE COLLAR RECEIVER TO THE REMOTE TRANSMITTER:
1. Turn the Collar Receiver off.
2. Press and hold the On/Off Button. The Receiver Indicator Light will come on and then turn off after 5 seconds.
NOTE: If the Receiver Indicator Light begins flashing, repeat this step.
3. Release the On/Off Button.
4. Press and hold one of the Side Buttons on the Remote Transmitter until the Receiver Indicator Light flashes 5 times.
5. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin
flashing as normal. If the Receiver Indicator Light does not flash, repeat this procedure.
SPORTDOG.COM
7