General Information; Safety Information - Hach SIP 10 Manual Básico Del Usuario

Specifications
Subject to change without notice.
Performance specifications
Dual pathlength Pour-Thru Cell, plastic, 1 inch/
Cell path length
1 cm
Wavelength range 340–900 nm
Rinsing volume Minimum of 25 mL
Flow speed 1 mL/sec
Interface USB type A
Power supply Via USB cable, 530 mA, 5 V
Ambient storage –10–60 °C (14–140 °F), 85% relative humidity
requirements (non-condensing)
Ambient operating 10–40 °C (50–104 °F), 80% relative humidity
requirements (non- condensing)
Dimensions 120 x 85 x 200 mm
Weight 0.5 kg
Enclosure rating IP30

General Information

Safety Information

Please read the entire user manual carefully before the device is
unpacked, set up or put into operation. Pay attention to all danger and
caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
To make sure that the safeguards provided by this device are not
impaired, do not use or install this device in any manner other than that
specified in this user manual.
Hazard Information in this User Manual
D A N G E R
Indicates a potentially or imminently hazardous situation that, if not avoided,
results in death or serious injury.
WA R N I N G
Indicates a potentially or imminently hazardous situation that, if not avoided, could
result in death or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate
injury.
N O T I C E
Indicates a situation that, if not avoided, could result in damage to the instrument.
Information that requires special emphasis.
Note: Information that supplements points in the main text.
English
English 3