Zhermack VAP 6 Manual De Instrucciones página 146

12
Figure
13
Figure
14
Figure
15
Figure
146 of 328
EN
Fig. 12: Regenerate the water softener as explained in
section 6.6.2.
Improper regeneration of the water
softener can damage the steam
generator. If you have any doubts,
please contact properly qualified
personnel.
Fig. 13: Connect the other end of the softener hose
(27) to the water inlet connector (17) on the steam
generator.
Fig. 14: Connect the other end of the softener hose
(28) to the mains water supply.
Make sure water pressure does not
exceed 3/4 bar; it is advisable to fit a
pressure reducer calibrated to 1 - 2 bar.
Fig. 15: Connect the lead to the power mains: ensure
that connection is effected as per the instructions given
in section 6.4.
Press the main switch (3): the LED on the switch come
on.
MAINTENANCE AND USE MANUAL
VAP 6 / 6A - AD 8