Tools And Parts - ELICA ESN130 Guía De Instrucciones Para Instalación

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed (all models)
■ Drill
■ 1¹⁄ " (3.0 cm) drill bit
4
■ ¹⁄ " (3.0 mm) drill bit for pilot holes
8
■ Pencil
■ Wire stripper or utility knife
■ Tape measure or ruler
■ Caulking gun and weatherproof caulking compound
■ Flat-blade screwdriver
■ Phillips screwdriver
Models EFS130 (ducted installation)
Parts Supplied
■ 2 - 3.5 x 9.5 mm screws.
■ 3¹⁄ " x 10" (8.3 x 25.4 cm) rectangular vent connector.
4
Parts Needed
■ Wall or roof cap to match vent system
■ 1 - 75W max, 120V incandescent light bulb.
■ 3¹⁄ " x 10" (8.3 x 25.4 cm) rectangular metal vent system
4
■ 3¹⁄ " (8.3 cm) rectangular damper No return valve (optional)
4
Accessories part No. EXXNRVRT
Models ERS230 (ducted or non ducted
(recirculation) installation)
Parts Supplied
■ 2 - 3.5 x 9.5 mm screws
■ 3¹⁄ " x 10" (8.3 x 25.4 cm) rectangular vent connector
4
Parts Needed
■ 2 - 40W max, 120V incandescent light bulb
■ Wall or roof cap to match vent system
For 7" (17.8 cm) round vented installations:
■ 7" (17.8 cm) round metal vent system
■ 7" (17.8 cm) round vent mounting plate.
Accessories part. No. EXXTRK07
■ 7" (17.8 cm) round damper non return valve (optional).
Accessories part No. EXXNRVRD
For 3¹⁄4" x 10" (8.3 x 25.4cm) rectangular vented installations:
■ 3¹⁄ " x 10" (8.3 x 25.4 cm) rectangular metal vent system
4
■ 3¹⁄ " (8.3 x 25.4 cm) rectangular damper No return valve.
4
(optional). Accessories part No. EXXNRVRT
For non-vented (recirculation) installations:

Tools and Parts

■ Saber or keyhole saw
■ Metal snips
■ Compass or 8" (20.3 cm) circle template
Parts Supplied (all models)
■ 4 - 3.5 x 9.5 mm mounting screws
■ T-10 Torx®† adapter
Parts Needed (all models)
■ 3 - UL listed wire connectors
■ Vent clamps
For cabinets with recessed bottoms:
■ Two 2" (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
■ Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
Recirculation kit. Accessories part No. ERSRCK30
Models ESN130 (non ducted [recirculation] installation)
Parts Needed
■ 1 - 75W max, 120V incandescent light bulb.
Models ENM230 / ENM236 (ducted or non ducted
[recirculation] installation)
Parts Supplied
■ 2 - 3.5 x 5 mm screws
■ 3¹⁄4" x 10" (8.3 x 25.4 cm) rectangular vent connector with
damper non return valve
Parts Needed
■ 2 - 50W max, 120V halogen lamps
■ Wall or roof cap to match vent system
For 7" (17.8 cm) round vented installations:
■ 7" (17.8 cm) round metal vent system
■ 7" (17.8 cm) round vent mounting plate.
Accessories part. No. EXXTRK07
■ 7" (17.8 cm) round damper non return valve (optional).
Accessories part No.EXXNRVRD
For 3¹⁄4" x 10" (8.3 x 25.4cm) rectangular vented installations:
■ 3¹⁄4" x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
■ Recirculation kit. ENM230 / ENM236: Accessories part No.
ENMRCK36
3
†®TORX is a registered trademark of Saturn Fasteners, Inc.