Operating The Controller; Water Budget - Irritrol TOTAL CONTROL Guia Del Usuario

. Use the + or – button to select the Day Interval (1–30 days).
D
. Press the
NEXT
E
current setting.
. Use the + or – button to select the desired setting for today.
F

OPERATING THE CONTROLLER

This section includes instructions for the following controller operations:

• Water Budget

• Manual Operations
• Off and Rain Delay Modes
WATER BUDGET
The Water Budget feature enables you to easily increase or decrease
the station run time (by percentage) of all stations assigned to a
selected program. This is handy for making temporary, overall station
run time adjustments without changing the original run time settings.
Water Budget values range from 0 to 200% in 10% increments, with
100% being the normal setting.
For example, as the fall season approaches and the temperature
decreases, you may want to reduce the station time for the stations in
program A by 30%. Later you can return station times to their original
values by setting the Water Budget value back to 100%.
Note: It is possible to inadvertently cause start time stacking when
increasing station run time. Careful planning and use of Water Budget
will prevent this from occurring.
To change the Water Budget percentage value of a selected program:
1. Turn the function dial to the
2. Select Program ,
A
3. Use the + and/or – buttons to increase or decrease the percentage
value (0–200%).
4. Turn the function dial to the
Note: The controller displays the % symbol in the
when Water Budget is in use for any program. During operation,
the adjusted run time will be displayed.
Operating the Controller
button. The controller displays
Water Budget
, or with the
B C D Program
position.
Run
and its
TODAY
position.
switch.
position
Run
15