Select Program - Irritrol TOTAL CONTROL Guia Del Usuario

To set a watering day schedule for each program:
1. Turn the function dial to the
will show the current watering day schedule for the selected
program.

2. Select Program

3. Set the watering day(s) for the program using one of the three
following procedures: Days of the Week, Odd Days/Even Days or
Day Interval scheduling procedure.
4. Repeat steps 2 and 3 as necessary to set a watering day schedule
for each program.
Days of the Week
. Press the
A
shown at the top of the display.
. Press the
B
. To select the day, press the
C
from the schedule, press the
. Press the
D
. Repeat steps
E
Odd Days or Even Days
. Press the
A
displayed.
. Press the
B
Optional: To remove selected days of the week from the
Odd/Even watering schedule:
. Press the
1
flashing.
. Press the
2
(Press the
Day Interval
. Press the
A
displayed.
. Press the
B
. Press the
C
Interval number (1–30).
Programming the Controller
14
Watering Days
, , or with the
A B C D
button until the weekday abbreviations are
NEXT
button. (Sunday) will begin flashing.
ON
SUN
button. To remove the day
ON
OFF
button to select the next day.
NEXT
and to set the remaining days of the week.
C D
button until
NEXT ODD DAYS
button to select the schedule.
ON
button until the selected day begins
NEXT
button to exclude the day from the schedule.
OFF
button to restore the day to the schedule.)
ON
button until the
NEXT
button to select this option.
ON
button. The display shows the current Day
NEXT
position. The display
switch.
Program
button.
or is
EVEN DAYS
option is
DAY INTERVAL