Switching On And Off; Maintenance And Cleaning; Service; Warranty - Parkside PWS 230 A1 Instrucciones De Utilización Y De Seguridad

Preparing for use / operation / Maintenance and cleaning / Service / Warranty
of sparks. Check that all the fastened-on parts
are correctly attached.
P ay attention to see that the arrow showing the
direction of rotation on the roughing / grinding
or cutting discs (including diamond cutting discs)
corresponds with the direction of rotation of the
device (see arrow on the head of the device).
Operation
Q

Switching on and off

Q
Note: Always switch on the angle grinder before
bringing it into contact with the workpiece material.
Switching on the device:
P ress the safety lock-out
Then press the oN / oFF switch
Switching off the device:
R elease the oN / oFF switch
Rotating the hand grip:
Pull the mains plug out of the mains
socket before you carry out any task
on the device.
T he hand grip can be rotated by 90° to
1
the right or left (see Fig. A).
T his allows the oN / oFF switch
brought into the most comfortable position for
any working conditions.
P ress the unlocking button
hand grip to the right or left.
1
M ake sure the hand grip

Maintenance and cleaning

Q
Pull the mains plug out of the mains
socket before you carry out any task
on the device.
D o not use sharp objects for cleaning
the device. Do not allow any liquids
to enter the device. otherwise the device
could be damaged.
46 GB/MT
(see Fig. H).
3
.
2
.
2
DANGER OF INJURy!
to be
2
and rotate the
4
engages.
1
DANGER OF INJURy!
H ave the carbon brushes replaced only at the
service centre or an accredited electrical
equipment repair centre. The device requires
no other maintenance.
C lean the device frequently; for best results do
this immediately after you have finished using it.
U se a dry cloth to clean the housing – under
no circumstances use petrol, solvents or cleaning
agents that attack plastic.
A vacuum cleaner is required to thoroughly
clean the device.
V entilation openings must always be kept free.
R emove any adhering dust with a narrow paint
brush.

Service

Q
Have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.

Warranty

Q
The warranty for this appliance is for 3 years
from the date of purchase. The appliance
has been manufactured with care and me-
ticulously examined before delivery. Please
retain your receipt as proof of purchase. In
the event of a warranty claim, please make
contact by telephone with our Service
Department. Only in this way can a post-
free despatch for your goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile components,
e.g. buttons or batteries. This product is for private use
only and is not intended for commercial use.