Autoreverse Function - KaVo Kerr elements e-motion Instrucciones De Uso

Autorev / Forward function
Note
Autorev / Forward function is the default torque mode for all rotary files.
Autorev / Forward is active.
▶ Press the foot control.
ð
The motor starts.
Once 90% of the set torque value are reached, a notifying beep is issued and
the light starts to pulse. Once the set torque is reached, the motor stops and
then automatically starts at the same speed in counterclockwise direction.
In Autorev/Forward mode, the motor automatically returns to clockwise rota-
tion after 1 second such that the user does not have to stop it with the foot
control.
▶ To stop this release the foot control.

Autoreverse function

Autoreverse is active.
▶ Press the foot control.
ð
The motor starts.
Once 90% of the set torque value are reached, a notifying beep is issued and
the light starts to pulse. Once the set torque is reached, the motor stops and
then automatically starts at the same speed in counterclockwise direction.
▶ To stop this release the foot control.
▶ Press the foot control.
ð
The motor rotates clockwise again.
▶ To stop this release the foot control.
Torque Control function
Torque Control is active.
Instructions for use elements e-motion Dental Motor
6 Operation | 6.4 Operating the elements e-motion
33 / 55