Decommissioning; Disconnecting The Electrical Connection; Disconnecting The Foot Control; Unplugging The Motor - KaVo Kerr elements e-motion Instrucciones De Uso

7 Decommissioning | 7.1 Disconnecting the electrical connection

7 Decommissioning

7.1 Disconnecting the electrical connection

▶ To disconnect the power cable from the mains, unplug the connector of the
power supply from the supply mains socket.
▶ Unplug the power cable from the device.

7.2 Disconnecting the foot control

▶ Unplug the jack of the foot control from the elements e-motion.

7.3 Unplugging the motor

▶ Unscrew the plug of the motor cord from the connector on the device. Make
sure to grasp the plug as close to the device as possible.
Note
Cleaning and disinfecting the motor connected with the motor cord.
See also:
2 Instructions for use INTRA LUX KL 703 LED
Instructions for use elements e-motion Dental Motor
43 / 55