Technical Data - Leister ASTRO Manual De Instrucciones

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this
product, in the version as brought into circulation through us, fulfils the requirements of the
following EC directives.
Directives:
Harmonised standards:
Kaegiswil, 29.08.2012
Disposal
Power tools, accessories and packaging should be sorted for environmental-friendly
recycling. Only for EC countries: Do not dispose of power tools into household waste!
According to the European Directive 2002/96 on waste electrical and electronic equip-
ment and its incorporation into national law, power tools that are no longer suitable
for use must be separately collected and sent for recovery in an environmental-friendly
manner.

Technical data

Voltage
Frequency
Power consumption
Temperature
Welding pressure
Drive
Overlap width
Thickness of material
Noise emission level
Size L×W×H
Weight
Conformity mark
Protection class I
Technical data and specifications are subject to change without prior notice.
12
2006/42, 2004/108, 2006/95, 2011/65
EN 12100-1, EN 12100-2, EN 14121-1
EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3,
EN, 62233, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~ 200, 230 (mains voltage is not reversible)
Hz 50/60
W 1800
°C / °F max. 420 / 788
N / Ibs
max. 1500 / 337
m/min / feet
0.8– 5.0 / 2.6 – 16.5
mm / Inch max. 150 / 5.9
mm / mil 1.5 – 3.0
L (dB)
< 71
pA
mm
475 × 355 × 315
kg / lbs
23 / 50
2
1
Beat Mettler, COO