Type Plate; Safety Instructions - Abicor Binzel ROBO WH Serie Instructivo De Servicio

WH and WHPP
Power supply
Continuous nominal current
Gear transmission
Tab. 4 Changeable body
1When ordering, the wire feed unit must be specified
Standard length L (m)
Coolant connection
Cooling unit power
Air-blast hose
Control line
Weight/meter
Tab. 5 ROBO hose assembly
2.4 Abbreviations
MIG
MAG
Voltage rating
ROBO WH-....
ROBO WH-....D
WH
WHPP
TCP
Tab. 6 Abbreviations

2.5 Type plate

3 Safety Instructions

1
WH
1.00, 1.20, 1.50, 2.00, 2.25, 3.00
Metal Inert Gas
Metal Active Gas
Classification of the insulation resistance, voltage strength and protection type
Designates the torch neck
Designates the torch neck with replaceable tip adaptor
Designates the standard changeable body
Designates the changeable body in the push-pull design
Tool Center Point
The Welding torch system WH/WHPP is identified by a sticker on the machine
side connection housing.
When making any inquiries, please remember the following information:
• Specify the certificate of conformity, Production stamp on the torch neck,
for example WH 455D, Sticker data
Observe the enclosed document Safety Instructions.
WH
24 VDC or 42 VDC
0,44 A
17, 1:1 or 15, 3:1
Connector nipple NW 5
min. 800 W
G 3/8" (spigot nut)
10-wire
approx. 0.7 kg
3 Safety Instructions
WHPP
WHPP
2.00, 3.00, 4.00
EN - 7