Wire Guide; Risk Of Injury; Guide Spiral Liner - Abicor Binzel ROBO WH Serie Instructivo De Servicio

WH and WHPP

9.1 Wire guide

9.2 Guide spiral liner

1
6
5
1 Guide spiral liner
2 Wire feed hose
Fig. 17 Guide spiral liner
1 Unscrew the hose assembly on the machine side and bring it into a
stretched position.
2 Unscrew liner nut and pull out guide spiral liner or PA liner.
WARNING

Risk of injury

Serious injuries caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable
protective clothing, in particular safety goggles.
3 Clean wire feed hose from both sides with compressed air.
4 Slide adjusted guide spiral liner or PA liner into wire feed hose and secure
with spigot nut.
2
3 Central plug
4 Liner nut
9 Maintenance and cleaning
3
2 - 3mm
x
4
5 Side cutting pliers
6 Stop
EN - 21