Optional Ac Adapter - Brother P-touch 1300 Manual Del Usaurio

The AC adapter (AD-60) allows you to use this machine wherever there is an electrical
outlet.
To connect the optional AC adapter:
1 Insert the plug on the adapter cord into the connector marked DC IN 9.5V on the
bottom end of the machine.
2 Insert the plug on the adapter into the nearest standard electrical outlet.
Only use the AC adapter designed exclusively for this machine.
Remove the batteries and disconnect the AC adapter if you do not intend to use
this machine for an extended period of time. When the power is disconnected,
all text shown in the LCD display and stored in the memory will be lost.
When the AC adapter is connected, unplugging the adapter from the electrical
outlet before unplugging it from the machine can delete all text files in the
memory, even if batteries are installed.
It is recommended that you use the AC adapter when printing large fonts and
barcodes on 3/4" (18-mm)-wide tape since these operations can quickly drain
the batteries.
6

OPTIONAL AC ADAPTER