Installation; Installation Options; Wall Installation - ABB TTF350 Instrucciones Para La Puesta En Funcionamiento

Installation

3 Installation
3.1

Installation options

There are two ways to install transmitters:
•

Wall installation

• Pipe installation
Important
The transmitter is equipped with an LC display as standard.
3.1.1 Wall installation
Fig. 1: Dimensions in mm/inches
1 Wall
2 Wall mount
1. Locate an installation site close to the temperature sensor head.
Warning - General hazards!
The transmitter can fall and be damaged if not firmly attached. There is also a risk that
persons can be injured.
Install the wall mount on a sufficiently stable wall only.
2. Screw the transmitter to the wall mount.
3. Attach the wall mount securely with 2 screws (∅ 10 mm).
8 - EN
2
1
241 / 9.49 241 / 9.49
3
1
3 Transmitter TTF350
TTF350
3
2
241 / 9.49 241 / 9.49
A00183
CI/TTF350-X1