Gima OXY 110 Guía De Uso página 60

4.4.2 Data Deletion
On the record list screen shown in figure 4.14 or 4.15, move the cursor on the
record you want to delete, and longtime pressing Mute/Right key (
message "Are you sure to delete all?" prompts on the screen, as shown in figure
4.16.
Figure 4.16 Delete records
At this time, short time press Menu/Confirm (
the records. Or short time press Record/Back (
screen.
4.4.3 Data Upload
If you want to upload the stored data (SpO
puter, then Make sure the provided USB data cable is well connected between
the device and PC before uploading data, as shown in figure 4.17. Refer to the
instruction in "Oximeter Data Manager User Manual"for detailed operation.
Figure 417 Data
uploading screen
• During data uploading, the user can not do any operation on the oximeter.
When the wireless transmission function is on, the Handheld Pulse Oximeter can
communicate with a host (such as computer or mobile) for viewing and mana-
gement.
a. Open the host's wireless function and procedure and start to scan the SP-20
Oximeter.
b. The host will pair with the SP-20 Oximeter at a moment.
c. After connecting, the host can display and manage the measurement data of
SP-20 by wireless.
The pairing and transmitting distance of wireless function is 8 meters in the nor-
mal. If the host can't pair with the SP-20, you will try to narrow the distance
between the host and SP-20.
ENGLISH
) key to confirm and delete
) key to return to record list
, PR and TEMP values) to the com-
2
60
), then an