Nuova Simonelli Aurelia II Serie Instrucciones De Manejo página 38

DISPLAY AND KEY
INDICATIONS
OVERCURRENT ERR.
FINE GRINDING
COARSE GRINDING
78
CAUSE
Incorrect electrical input The display reading will
caused by a malfunction flash. The pump will
in one of the machine switch off. The heating
charges. element and all other
functions will be disa-
bled.
The machine registers
A much longer delivery
values different from the
time.
set values.
A much shorter delivery
The machine registers
time.
values different from the
set values.
EFFECT SOLUTION
Switch off the machine
and send for a specialist
technical engineer.
Modify grinding degree
and press the key
or one of the keys
.
Press the
one of the keys
.
NOTES
By leaving the machine in
the programming state,
within 10 minutes from
the last selection, the sys-
tem will return to the pre-
vious configuration and
the display will indicate its
reestablishment of nor-
mal functioning.
key or