Wall Mounting Your Xlc3.4 - Clarity XLC3.4 Guia Del Usuario

XLC3.4
Wall mount your telephone as shown on the enclosed Quick Start guide.
(This is optional.)
1. Follow the instructions in the Installation section on page 6 to remove
the base and handset from the base – steps 1, 4, 6.
2. Unplug the long phone line cord from the phone jack located on the
back of your XLC3.4. Plug one end of the short phone line cord into
the same jack identified by LINE on the back of your base.
3. Install the XLC3.4 base onto the wall mount bracket as shown on page
9. Guide the short phone cord through the wall mount bracket as
shown in the diagram.
4. Using a screwdriver, loosen the screws on your phone wall outlet (1-2
turns).
5. Plug the loose end of the short phone cord into the wall phone outlet.
6. Attach the wall mount bracket (with the XLC3.4 base) onto the wall
phone outlet.
7. Plug the power adapter into a wall electrical outlet.
8. Pull the handset's battery tab located on the bottom of the device in
the direction of the arrow.
9. Place the handset in the base and allow 10 hours for full charge.
8

WALL MOUNTING YOUR XLC3.4