Battery Information - Clarity XLC3.4 Guia Del Usuario

XLC3.4
HANDSET
The batteries in the handset must be fully charged for 10 hours before using the
telephone for the first time.
Battery life: Talk time is 6.5 hours, while standby is 130 hours without usage. Actual
times will vary depending on the amplifier settings used. Replace batteries every two
years.
Battery spec (as supplied with your phone): 3xAAA NiMH rechargeable
batteries,(1.2V 600mAh NiMH - model 60AAAHC, GPI International Ltd. or HFR-
44AAAJ600, Shenzhen Highpower Technology Co., Ltd).
To replace batteries, remove the handset battery cover and install new batteries, then
close battery cover.
BASE
The base backup batteries ensure the functionality of your cordless phone (3-4 hours)
in case of a power outage.
When the base unit operates in battery mode (no AC power). the base POWER light
will blink once every two seconds.
To install batteries in the base:
1. Turn base over and open battery compartment door.
2. Install batteries according to the polarity shown inside the battery compartment.
NOTE: To replace handset batteries or to install base backup
batteries, use ONLY standard rechargeable AAA NiMH batteries -
600mAh.
LOW BATTERY INFORMATION
Handset
1. The battery icon on the screen shows no bars; the screen displays "Low Battery".
2. The handset beeps every two seconds in OFF HOOK mode.
3. The TALK button blinks green twice every 15 seconds in standby mode. It will not
flash an alert in OFF HOOK mode.
Base (if optional batteries are installed)
1. The POWER light will blink green once every five seconds.
WARNING: Use rechargeable batteries only.
16

BATTERY INFORMATION

Do NOT use alkaline batteries!
Open battery
compartment door
here.